|
|
 |
| Cable drag chains made of TLG shape steel |
 ¡¡The TLG drag chains are suitable for lnstalling a large
quantity and heavy duty of cables and oil pipes which allow
suspending installation(supporting is not allowed)and is
lengthy. The supporting plate can be made according to the
user¡¯s requirements It ls suitable for machine tools and moving
machines. Their bent radlus ranges from50-600mm and the
chain¡¯s height is from 35 to 150mm. Users can make a free
selection of them.
¡¡The TLG type drag chalns has a max.travel range of 32
meters and are suitable for all kInds of transmissions. It can
freely be made Ionger or shorter In addition, the bend radius
can be changed by changing the pinshaft.
¡¡The width of the supporting board is from l50mmto 600mm.
The distance between the holes Is 5mm.
¡¡The height of the supporting board depends on the max.
outsIde dIameter of the cables. When the machine tool is
working ln the highest speed andif the max. width of the drag
chain is longer than 300mmwiththe chain¡¯s length longer than
4m£¬one size larger than normaI should be selected lust out of
considration of safety.
¡¡The bend radius should be selected according to lhe max.
diameter of a cable and shoulod be 10 times of the diameter
of the cable used. The bend radlus can be selected as 50-600mm according to the given table. Smail radius should be
selected for those ones with smalI travel range.
¡¡Drag chain length=1/2 travel range+4 bend radius.this is
only used for the fixed connection which is located at the middle
point of the traveI range.
¡¡The fexation of the drag chains can be done according to
the location of the machine tools. The angle steel can be put
ln the outer or the lnner,ln other words In the lnner side of the
chains or In the oute side. ln common cases lt ls In the inner
side of the chains and face towards outside.
|
|
| |
 |
| |
| Main parameters & demensions for TLG type steel drag chains |
| Type |
Bending radius £¨mm£© |
Pitch |
a |
c |
d |
e |
f |
g |
h |
k |
When non-support
Wheel is allowed |
Weight 100mm |
| Length m |
kg/m |
| TLG10 |
50/100/150/200 |
50 |
19 |
35 |
5.5 |
3 |
20 |
7.5 |
7 |
9.5 |
3 |
4 |
2.30 |
| TLG20 |
100/150/200/250/300 |
75 |
31 |
50 |
8 |
4 |
30 |
12 |
9 |
15 |
3/2/2 |
20/30/30 |
4.90/4.80/5.50 |
| TLG30 |
150/200/250/300/400 |
100 |
49 |
75 |
10 |
4 |
50 |
17 |
11 |
21 |
4/3/3 |
25/40/40 |
9.10/9.10/10.00 |
| TLG40 |
200/250/300/400/500 |
125 |
68 |
100 |
14 |
4 |
70 |
22 |
13 |
28 |
6/4/4 |
30/50/50 |
18.10/18.10/19.30 |
| TLG50 |
250/300/400/500/600 |
175 |
118 |
150 |
14 |
8 |
115 |
26 |
13 |
32 |
10/8 |
10/30 |
25.00 |
|
| |
Specifications for ordering:Travel 11.2m,Bending radius 300mm,3Cable diameter48,3Cable diameter28,2Hosesdiameter36.
| Type |
Radius |
Length |
Width of support board |
Mode of fixing |
Mode of installation |
| TLG50 |
300 |
6875 |
350 |
D/E |
"S" |
TLG type supporing boards in various specifications
¡¡The TLG type aJuminlum alloy draq chains are different from
the ordinary ones. They can made by using fixed aluminlum
shape materials to meet the needs of the users. The width of
the suppoding board can be 1200mm. When operating under
high operating speed and high travel speed,the drag chains
can be separated from one another so as to ensure the cables
being protected ln a very safe conditions.
¡¡One supprting board ls provided for every two chain joints. lf
one suppodinq board ls needed for each chain joint£¬please
give a clear lndication of the model no. 10A/20A/30A/40A/50A
rather than 10B/20B/30B/40B/50B, i.e.TLG20B/200X2100/200 "h" or TLG221/200X2100,200 "h".
¡¡The order number for ¡°Silver Star type drag chains with
aluminium alloy guard is 325£¯525£¯625.For futher information,
please see ¡°Sliver Star type Guards¡± below for details,i.e.
TLG325/200¡Á2100/200 ¡°h¡±. |
| |
|
|
