Feature of mounts
It isolators the vibration and shock of the machine from the floor. It can also reduce the influences from other machine. Better parts finshes and high quality from vibration reduction. It elimlnates the noise transferred from the fIoor or due to the resonance of building.
Machine are stationary on the floor without anchors.It keeps the machine in its position,Therefore the installation cost and time can be greatly saved. The layout can be easily changed to improve the productivity.Machines can set up on the second floor.
The machine tools level can be large range adjusted.easily and fast.
Elastomers is make of Nitvile rubber compound,It can resist oil and refrigerant.
Application
Metalcutting machines,Metalforming machines,Rubber and plastic machines. Printing machines,Wire machines, Packing machines,Foodprocess machines,Generator and heavy—duty machines.
How to install
Place the mounts under the anchor hole of the machine. Insert the bolt into the screw hole of mount. And screw lt in until it reaches the bearing plate. Then adjust the level of machine. Finally tighten the nuts.